The Horizontal Agitated Thin Film Evaporator TFE/HC consists of a slightly conical stator with a horizontal heated axle and a high speed rotor, able to make the product film adhere to the walls in conditions of high turbulence. Distributor position corresponding to the product inlet.

FEATURES

1. Where longer residence time is required, for reactions or where headroom is limited, from 0,05 to 15 m2 (larger on request)

2. Internal is slightly conical

3. Suited for vacuum from 0,1-0,5 mbar a to the atmosphere, or positive pressure

4. Conical shape features the adjustment of the gap to control the residence time or assure fully wetted heated surface even at high evaporation ratio or low feed rate, without hinged blades

5. Non-contacting L-type lobed rotor

6. The rotor sweeps the heated surface with a gap of some mm, this results in a great liquid turbulence

7. Wide range of viscosity

8. High concentration ratios

9. The rotor is supported at both sides by roller bearings, no internal pillow to give durability problems

10. L/D ratio gives a compact unit, with a large diameter, improving the performance under vacuum